top of page

Layered Male Birthday Card

TCW Stencils #tcwstencillove Lindy's Stamp Gang Magical

Hi everyone, today I’m on The Crafter’s Workshop blog with another fun masculine birthday card and this time I’m concentrating on working in layers to create an interesting background to look at.


The Crafter’s Workshop provided me with some product to create this project. The opinions I share are solely my own. This post also contains affiliate links.


To get this card started I first die cut my smallest background panel. For this I used a stitched square die and I die cut this panel from Cornwall Watercolour paper (bright white/rough). Then I roughly measured by hand two pieces of Rebekah Meier by Therm O Web “Mixed Media Art Tape“ in about the size of my panel. This Art Tape is fabulous, I love working with it, you can can tear it, stamp on it, stencil on it and it takes colour very well! It’s adhesive backed and the tape won’t come of your project when the adhesive comes in contact with water.

Next I tore of pieces of the sides of the tape to create a more roughed up edge and then I layered a stencil over the tape, working on my craft mat (but a piece of scrap paper will do fine as well), and applying Archival Ink in the colour “Sepia“ over the stencil using a foam applicator tool. I choose a The Crafter’s Workshop stencil called “Love Sonnet“ (TCW737s) for this, it creates an interesting texture in the background without drawing to much attention.

These pieces of Art Tape I adhered to the watercolour die cut panel with it own adhesive back. Then I added some staples to create a more masculine feel.

Lindy’s Stamp Gang Magical in the colour “Rusty Lantern Lime“

Now I can start colouring the watercolour panel. For this I choose a Lindy’s Stamp Gang Magical in the colour “Rusty Lantern Lime“. I added some of the powder to the project with a dry brush and then sprayed water and moved the colour around by moving the panel sideways, drying the panel with my Ranger Heat It tool when I liked what I had.

TCW Black Modeling Paste

For my next layer I used some The Crafter’s Workshop “Black Modeling Paste“ (TCW9009) and applied that over a The Crafter’s Workshop stencil called “Kitchen Tiles“ (TCW751s) using a palette knife. Don’t cover up all the interesting details from the Art Tape and be careful around the staples. Now you can set the panel aside to dry.

While this panel was drying I started working on another layer. For this I choose the Therm O Web “Mixed Media Sheets“.

This is a translucent paper that you can paint on, die cut, tear, whatever you like! This is another Term O Web product that I love and that is very versatile. I tore a piece of this paper in a shape that I liked (at this point it’s handy to know what the size of your next layer will be so that you don’t make it to small). Then I coloured this piece of Mixed Media Sheet with a Lindy’s Stamp Gang Magical called “Time Travel Teal“. I put the paper on my craft sheet, added some of the powder with the dry brush, sprayed with water, moved the paper around in the colour (to prevent your fingers from also being coloured I can advice some tweezers for this), dry with the Heat It tool when you like the result and repeat when necessary.

When the paper was dry I added the same design from the Love Sonnet stencil that we used before using the same Sepia ink colour and a foam applicator tool.

I also stamped my focal point, for this I used a Nellie’s Choice stamp featuring an old car (CSMT005 - Oldtimer) (you can use any stamp that you have that will suite the occasion/or style of the recipient). I used Archival Ink in the colour “Jet Black“ on crème coloured linen textured card stock and using my MISTI. I die cut around the car image with a rectangle stitched die and I also created a slightly larger mat this way from some matching slightly shimmery brown card stock. These two mats I adhered together using liquid glue.

When the black modeling paste is dry I adhere this panel to a slightly larger die cut square panel that I created from some matching turquoise coloured linen textured card stock, using liquid glue. For some added interest in the background I splattered these combined panels with some Coliro Pearl Colors by Finetec GmbH in the colour “Blackberry“ and set aside to dry for a while. I love the combination of the black modeling paste on the green and brown background with some splatters for added interest!

After the splatters have dried I can put the card together: I choose a black linen textured card base, adhered the two combined square panels to this card base using one millimetre thick foam tape. Then I adhered the piece of Mixed Media Sheet on top using a little of the Therm O Web “Mixed Media Adhesive“ and the combined rectangle panels on top of this also using one millimetre thick foam tape. And to finish this card I added a Tim Holtz “Small Talk - Occasions“ sticker that I cut in half.

And that finishes today’s fun masculine project!

Thank you Therm O Web for providing the DT with some of these gorgeous products, I loved playing with them.

We would love to see what you create with The Crafters Workshop Stencils and Mediums. You can share it with us on our Facebook page, Instagram, Twitter, and Pinterest using hashtag #tcwstencillove.

#RebekahMeierMixedMediaArtTape #TCWStencilLoveSonnet #LindysStampGangMagicalRustyLanternLime #TCWBlackModelingPaste #TCWstencilKitchenTiles #ThermOWebMixedMediaSheets #ColiroPearlColorsBlackberry #ThermOWebMixedMediaAdhesive

bottom of page